Procelerant PICOZ500 Pico-ITX
Intel® Atom Z500 Series Embedded Single Board Computer
Description
The Procelerant PICOZ500 Pico-ITX is a single board computer based on the Intel Atom™ Z510 processor. It is designed specifically for use in low-power or battery-powered applications such as patient monitors, test and measurement equipment, gaming, and infotainment systems. The PICOZ500 is also ideally suited to space-constrained applications with a need for passive cooling and low-power operation.
The PICOZ500 is available with 512MB DDR2-400 integrated memory and has a MicroSD socket for up to 2GB Flash memory. The PICOZ500 has an integrated video controller that can support a variety of touch-screen LVDS or TTL panels using a cable designed specifically for each panel.
A PCI Express Mini Card socket supports modules such as wireless LAN, and a 100-pin expansion connector enables the PICOZ500 to be interfaced to a custom expansion card with application specific I/O. The power source is a single input-voltage power rail that can support operation with two to four Li-Ion or Li-Polymer cells. Additional battery management or Smart Battery support can be provided using an optional battery controller module.
Feature Summary
- 100mm x 72mm Pico-ITX
- Intel Atom™ Z510 processor
- Intel US15W SCH
- 512MB DDR2 memory
- 18-bit or 24-bit LVDS
- Driver for LED backlight display
- Gigabit Ethernet via header
- 2-channel CODEC
- 1.8” drive IDE header
- MicroSD socket
- Six USB 2.0 ports (one client)
- One serial port
- Touch screen interface
- PCI Express Mini Card
- Expansion connector
- Power input 6V to 16.8V
- General Software BIOS
- ACPI 3.0
- RoHS compliant
Specifications
| Feature | Function | Specification |
|---|---|---|
| Form Factor | Size | Pico-ITX, 100mm x 72mm, 3.9" x 2.8" |
| Processor | Type | Intel Atom™ Z510 Processor 1.1GHz, 512k L2 cache, 400MHz FSB – Check with your RadiSys representative for other processor/memory combinations |
| System Controller | Type | Intel US15W |
| Memory | Type | Integrated 512MB DDR2-400 using 4 devices |
| Video | Type | US15W integrated graphics with LVDS and SDVO interfaces |
| LVDS | 18-bit or 24-bit | |
| Supports resolutions up to 1368 x 768 at 85Hz | ||
| Integrated backlight driver for panels with LED backlights | ||
| SDVO | Supports resolutions up to 1280 x 1024 at 85Hz | |
| Network | Controller | Intel 82574L Gigabit Ethernet MAC/PHY with header connector and on-board magnetics |
| Audio | Type | Intel High Definition Audio |
| Controller | IDT STAC9204 2-channel CODEC | |
| Output | Mono speaker output, 200mW | |
| Storage | IDE | 1.8" IDE header capable of supporting two Ultra ATA/100 devices |
| SDIO | microSD socket (max 2GB flash memory) | |
| USB | Six USB 2.0 ports via on-board headers (including one client port) | |
| Four USB 2.0 ports via expansion connector (two shared with on-board USB) | ||
| Serial Ports | Controller | COM1 via on-board header, COM2 via expansion connector |
| Touch Screen | Type | Support for 4-wire resistive touch screen interface |
| Embedded Controller | Supports SPI, Smart Battery (optional), Power on/off LED | |
| BIOS | Type | General Software |
| Flash | 1MB SPI ROM | |
| Expansion | Full size PCI Express Mini Card | |
| Socket for optional battery controller | ||
| Expansion connector for application specific expansion card | ||
| Front Panel | Connector | Front panel I/O and mono speaker out |
| Power Management | ACPI 3.0 with states S0, S3, S4, S5, G3 and C0, C1, C2, C3, C4/C4E, C6 | |
| Power Consumption | Designed for operation with a TDP less than 5W | |
| Power Input | 6 – 16.8V single voltage input | |
| Feature | Specification | |
|---|---|---|
| Expansion Connector | Signals | One x1 PCI Express lane (build option) |
| HDA audio, SPI bus, LPC bus, SMbus, I2C bus, SDVO, eight GPIO | ||
| Four USB 2.0 (including one shared host and one shared client port) | ||
| +12V power rail validated over 6V to 16.8V | ||
| Operating Systems | Windows XP Professional | |
| Windows XP Embedded with SP2 | ||
| Windows CE 6.0 R2 | ||
| Red Hat Linux | ||
| Physical Specifications | ||||
|---|---|---|---|---|
| Environment | Cooling | Forced Air | Class EAC1 as defined in the ANSI/VITA 47-2005 | |
| Conduction | Class ECC1 as defined in the ANSI/VITA 47-2005 | |||
| Temperature | Operating | 0°C to 60°C | ||
| Non-Operating | -40°C to 85°C | |||
| Relative Humidity | Operating | 5% - 95% non-condensing | ||
| Non-Operating | 5% - 95% non-condensing | |||
| Shock | Operating | 50g, half-sine shock pulse, 11ms duration, 3 times per face | ||
| Packaged | 50g, half-sine shock pulse, 17.4ms duration, 3 times per face | |||
| Vibration | Operating | Random 5Hz to 2kHz, 12.07 grms, 1hr in each of 3 axes 5Hz – 40Hz: 0.04 g2/Hz 40Hz – 100Hz: 0.04g2/Hz ramping up to 0.1g2/Hz (3dB/oct) 100Hz – 1kHz: 0.1 g2/Hz 1kHz – 2kHz: 0.1g2/Hz ramping down to 0.025g2/Hz(6dB/oct) |
||
| Packaged | As above 5 – 500Hz swept sine, 2.5g (0-p), 5 min dwell at 3 resonances in 3 axes |
|||
| Regulatory | Safety | UL60950-1, EN60950-1, IEC60950-1 | ||
| EMC | EN55022, EN55024 and FCC Part 15, Subpart B, Class B | |||
| Material | RoHS compliant, China RoHS | |||
Ordering Information
Order Codes
- PICOZ510–512: SBC with Z510 (1.1 GHz) processor and 512MB Memory.
- PICOZ500–IO: I/O board.
- PICOZ512–Kit: Starter kit. Includes PICOZ510–512, PICOZ500–IO, NEC touch screen display, power supply and all cables.
Find Your Product
- Categories
- Products
Support Downloads
Select your product below.
Access the Customer Interaction Center:
Contact RadiSys
Choose one of the contact options below.
Tel: (503) 615 - 1100
Toll-Free: (800) 950-0044
Fax: (503) 615 – 1115
©2010 RadiSys Corporation All Rights Reserved
